AdapterId 06F6Fh AdapterName "EICON TECHNOLOGY Single-Port Communication Coprocessor" NumBytes 3 FixedResources pos[3]=1xxxxxxxb NamedItem Prompt "I/O Address" choice "380-387" pos[0]=0xxx000xb io 0380h-0387h choice "388-38F" pos[0]=0xxx001xb io 0388h-038Fh choice "390-397" pos[0]=0xxx010xb io 0390h-0397h choice "398-39F" pos[0]=0xxx011xb io 0398h-039Fh choice "8380-8387" pos[0]=0xxx100xb io 8380h-8387h choice "8388-838F" pos[0]=0xxx101xb io 8388h-838Fh choice "8390-8397" pos[0]=0xxx110xb io 8390h-8397h choice "8398-839F" pos[0]=0xxx111xb io 8398h-839Fh Help "This item is used to select the SPCC I/O Address. Use the F5=Previous and the F6=Next keys to change the I/O address selection." NamedItem Prompt "Interrupt Level" choice "Level_3" pos[0]=x001xxxxb int 3 choice "Level_4" pos[0]=x010xxxxb int 4 choice "Level_5" pos[0]=x011xxxxb int 5 choice "Level_9" pos[0]=x100xxxxb int 9 choice "Level_10" pos[0]=x101xxxxb int 10 choice "Level_11" pos[0]=x110xxxxb int 11 choice "Level_15" pos[0]=x111xxxxb int 15 Help "This item determines the Interrupt Level assigned to the SPCC. Use the F5=Previous and the F6=Next keys to change the Interrupt Level assignment." NamedItem Prompt "Memory Location" choice "0D000:0000-0FFF" pos[2]= 00001000B mem 0D0000H-0D0FFFH choice "0D400:0000-0FFF" pos[2]= 00001010B mem 0D4000H-0D4FFFH choice "0D800:0000-0FFF" pos[2]= 00001100B mem 0D8000H-0D8FFFH choice "0DC00:0000-0FFF" pos[2]= 00001110B mem 0DC000H-0DCFFFH choice "0C000:0000-0FFF" pos[2]= 00000000B mem 0C0000H-0C0FFFH choice "0C400:0000-0FFF" pos[2]= 00000010B mem 0C4000H-0C4FFFH choice "0C800:0000-0FFF" pos[2]= 00000100B mem 0C8000H-0C8FFFH choice "0CC00:0000-0FFF" pos[2]= 00000110B mem 0CC000H-0CCFFFH choice "1C000:0000-0FFF" pos[2]= 00010000B mem 1C0000H-1C0FFFH choice "2C000:0000-0FFF" pos[2]= 00100000B mem 2C0000H-2C0FFFH choice "F0000:0000-0FFF" pos[2]= 11110110B mem 0F00000H-0F00FFFH Help "This item sets the address of the SPCC Memory Location. The first hexadecimal digit of the Memory Location defines the megabyte range (0 is the lowest 1MB), while the next four define the segment address. For DOS only the lowest 1MB selections can be used. Use the F5=Previous and F6=Next keys to change the Memory Location selection."