AdapterId 06eddh AdapterName "U.S. Robotics Courier PS/2 Modem" NumBytes 2 NamedItem Prompt "Serial(COM) Address" choice "SERIAL_1" pos[0]=XXX0000Xb io 03f8h-03ffh int 4 choice "SERIAL_2" pos[0]=XXX0001Xb io 02f8h-02ffh int 3 choice "SERIAL_3" pos[0]=XXX0010Xb io 3220h-3227h int 3 choice "SERIAL_4" pos[0]=XXX0011Xb io 3228h-322fh int 3 choice "SERIAL_5" pos[0]=XXX0100Xb io 4220h-4227h int 3 choice "SERIAL_6" pos[0]=XXX0101Xb io 4228h-422fh int 3 choice "SERIAL_7" pos[0]=XXX0110Xb io 5220h-5227h int 3 choice "SERIAL_8" pos[0]=XXX0111Xb io 5228h-522fh int 3 Help "The Courier Dual Standard can be assigned to use Serial 1 through Serial 8. Use the F5=Previous and the F6=Next keys to change serial port assignments. Conflicting assignments are marked with an asterisk. Conflicts must be resolved to use the adapter." NamedItem Prompt "Carrier Detect Operations" choice "CD on connect only" pos[0]=1xxxxxxxb choice "CD override" pos[0]=0xxxxxxxb Help "Use this setting to specify normal CD operation: courier sends CD signal when it connects with another modem, drops CD on disconnect. Using the CD override setting choice assures that CD is always on. Toggle between the choices with the F5=Previous or F6=Next keys." NamedItem Prompt "Data Terminal Ready Operations" choice "Normal DTR operation" pos[1]=x1xxxxxxb choice "DTR override" pos[1]=x0xxxxxxb Help "Use this setting to specify normal DTR operation: computer must provide DTR signal for modem to accept commands; dropping DTR terminates a call. Using the DTR override setting choice assures that DTR is always on. Toggle between the choices with the F5=Previous or F6=Next keys." NamedItem Prompt "Auto Answer" choice "Answers on first ring" pos[1]=xxxxx1xxb choice "Disabled" pos[1]=xxxxx0xxb Help "Use this setting to specify whether the modem auto answer is enabled or disabled. Toggle between the choices with the F5=Previous or F6=Next keys." NamedItem Prompt "Command Mode Local Echo" choice "Keyboard commands displayed" pos[1]=xxxxxx1xb choice "Echo suppressed" pos[1]=xxxxxx0xb Help "Use this setting to specify whether the modem local echo is enabled or suppressed. Toggle between the choices with the F5=Previous or F6=Next keys." NamedItem Prompt "Result Codes" choice "Disabled" pos[1]=xxxxxxx1b choice "Enabled" pos[1]=xxxxxxx0b Help "Use this setting to specify whether the modem display result codes or suppresses them. Toggle between the choices with the F5=Previous or F6=Next keys." NamedItem Prompt "Verbal/Numeric Result Codes" choice "Verbal (word) results" pos[0]=x1xxxxxxb choice "Numeric results" pos[0]=x0xxxxxxb Help "Use this setting to specify whether the modem uses verbal or numeric result codes. Toggle between the choices with the F5=Previous or F6=Next keys." NamedItem Prompt "Auxiliary, Result Codes" choice "Results in orig & ans mode" pos[1]=1xxxxxxxb choice "Results in ans mode disabled" pos[1]=0xxxxxxxb Help "Use this setting to specify whether the modem displays result codes in originate and answer mode or originate mode only. Toggle between the choices with the F5=Previous or F6=Next keys." NamedItem Prompt "Power-on Defaults" choice "Boot NVRAM defaults" pos[1]=xx1xxxxxb choice "Boot factory defaults" pos[1]=xx0xxxxxb Help "Use this setting to specify whether the modem uses its internal non-volatile memory to initialize its settings on power-up. Using the FACTORY SETTINGS choice assures that the modem is always initialized to known settings, regardless of previous use. Toggle between the choices with the F5=Previous or F6=Next keys." NamedItem Prompt "AT Command Recognition" choice "Disabled (Dumb modem)" pos[1]=xxxx1xxxb choice "Enabled (Smart modem)" pos[1]=xxxx0xxxb Help "Use this setting to enable or disable the modem's command set. When set to 'DUMB', the modem cannot originate calls, but will answer the phone. This could be useful for applications needing restricted access to the phone lines. Toggle between the choices with the F5=Previous or F6=Next keys." NamedItem Prompt "Escape Code (+++) Response" choice "Hangs up" pos[1]=xxx1xxxxb choice "Maintains connection" pos[1]=xxx0xxxxb Help "Use this setting to specify whether the modem escape code response hangs up or maintains a connection. Toggle between the choices with the F5=Previous or F6=Next keys."