AdapterId 06D73h AdapterName "COMTROL HOSTESS 550/MC Eight Port Serial Adapter" Numbytes 2 NamedItem Prompt "Address Range" choice "IBM Emulation, 8 Serial Ports" pos[0]=100000XXb pos[1]=XXXXXXXXb io 02F0h-02FFh 3220h-322Fh 4220h-422Fh 5220h-522Fh choice "IBM Emulation, 7 Serial Ports" pos[0]=100100XXb pos[1]=XXXXXXXXb io 02F8h-02FFh 3220h-322Fh 4220h-422Fh 5220h-522Fh choice "Base 280h-2BFh" pos[0]=XXX11XXXb pos[1]=00010101b io 0280h-02BFh choice "Base 2C0h-2FFh" pos[0]=XXX11XXXb pos[1]=00010111b io 02C0h-02FFh choice "Base 300h-33Fh" pos[0]=XXX11XXXb pos[1]=00011001b io 0300h-033Fh choice "Base 500h-53Fh" pos[0]=XXX11XXXb pos[1]=00101001b io 0500h-053Fh choice "Base 540h-57Fh" pos[0]=XXX11XXXb pos[1]=00101011b io 0540h-057Fh choice "Base 580h-5BFh" pos[0]=XXX11XXXb pos[1]=00101101b io 0580h-05BFh choice "Base 640h-67Fh" pos[0]=XXX11XXXb pos[1]=00110011b io 0640h-067Fh choice "Base 680h-6BFh" pos[0]=XXX11XXXb pos[1]=00110101b io 0680h-06BFh choice "Base 700h-73Fh" pos[0]=XXX11XXXb pos[1]=00111001b io 0700h-073Fh Help "This table provides the more commonly used choices for the HOSTESS/MC adapter board. The 'IBM Emulation, 8 Serial Ports' selection selects the following base addresses for ports 1-8: 2F8h, 3220h, 3228h, 4220h, 4228h, 5220h, 5228h & 2F0h. The 'IBM Emulation, 7 Serial Ports' selection selects the following base addresses for ports 1-8: 2F8h, 3220h, 3228h, 4220h, 4228h, 5220h & 5228h. When using this selection, select Mask Enable OFF and Interrupt IRQ3 in the following sections. If the list does not include the selection for your application, you may contact COMTROL Corporation at 1-800-926-6876 for additional information. The assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk, and must be changed. Use the F5=Previous and the F6=Next keys to change assignments." NamedItem Prompt "Interrupt" choice "IRQ3" pos[0]=X00XX0XXb int 3 choice "IRQ4" pos[0]=X01XX0XXb int 4 choice "IRQ5" pos[0]=X10XX0XXb int 5 choice "IRQ7" pos[0]=X11XX0XXb int 7 choice "IRQ9" pos[0]=X00XX1XXb int 9 choice "IRQ10" pos[0]=X01XX1XXb int 10 choice "IRQ11" pos[0]=X10XX1XXb int 11 choice "IRQ12" pos[0]=X11XX1XXb int 12 Help "This table provides the choice of one of eight interrupt levels. IRQ3 must be selected if the 'IBM Emulation, 8 Serial Ports' or 'IBM Emulation, 7 Serial Ports' selection is made." NamedItem Prompt "Mask Enable" choice "Off" pos[0]=1XXXXXXXb choice "On" pos[0]=0XXXXXXXb Help "This selection provides the same functions as the mask enable switch on the PC-bus HOSTESS board. OFF must be selected if the 'IBM Emulation, 8 Serial Ports' or 'IBM Emulation, 7 Serial Ports' selection is made or HOSTBUFFER DOS driver is used."