; Cray Communications A/S Cray LAN PS-x1x4/x5 Network Adapter ; Adapter Description File (incl. 32k support) ; ; Version: 3.02 ; ; (C) Copyright Cray Communications A/S 1991-1994. ; All rights reserved. AdapterId 06B83h AdapterName "ScaNet PS-x1x4/x5 Ethernet Adapter" NumBytes 4 NamedItem Prompt "Interrupt level" choice "IRQ 3" pos[0]=XXX10X0Xb int 3 choice "IRQ 9" pos[0]=XXX01X0Xb int 9 choice "IRQ 4-15" pos[0]=XXX11X0Xb choice "IRQ Disabled" pos[0]=XXX00X0Xb Help "The interrupt level can be set to 3 and 9 using the POS selections. To use interrupt level 4-15 chose this and set the appropriate jumper on the adapter. Note that interrupt conflicts will not be detected by the POS Menu using this selection. Use the F5=Previous and the F6=Next keys to change the selctions if you are in the 'Change Configuration' window." NamedItem Prompt "RAM Address" choice "0D0000" pos[1]=00001101b pos[3]=xxxxxx10b mem 0D0000h-0DFFFFh choice "0C0000" pos[1]=00001100b pos[3]=xxxxxx10b mem 0C0000h-0CFFFFh choice "100000" pos[1]=00010000b pos[3]=xxxxxx10b choice "200000" pos[1]=00100000b pos[3]=xxxxxx10b choice "400000" pos[1]=01000000b pos[3]=xxxxxx10b choice "600000" pos[1]=01100000b pos[3]=xxxxxx10b choice "800000" pos[1]=10000000b pos[3]=xxxxxx10b choice "A00000" pos[1]=10100000b pos[3]=xxxxxx10b choice "C00000" pos[1]=11000000b pos[3]=xxxxxx10b choice "D00000" pos[1]=11010000b pos[3]=xxxxxx10b choice "E00000" pos[1]=11100000b pos[3]=xxxxxx10b choice "F00000" pos[1]=11110000b pos[3]=xxxxxx10b choice "FC0000" pos[1]=11111100b pos[3]=xxxxxx10b choice "FD0000" pos[1]=11111101b pos[3]=xxxxxx10b choice "FE0000" pos[1]=11111110b pos[3]=xxxxxx10b choice "FF0000" pos[1]=11111111b pos[3]=xxxxxx10b choice "0D0000 32kB" pos[1]=00001101b pos[3]=xxxxxx00b mem 0D0000h-0D7FFFh choice "0D8000 32kB" pos[1]=00001101b pos[3]=xxxxxx01b mem 0D8000h-0DFFFFh choice "0C0000 32kB" pos[1]=00001100b pos[3]=xxxxxx00b mem 0C0000h-0C7FFFh choice "0C8000 32kB" pos[1]=00001100b pos[3]=xxxxxx01b mem 0C8000h-0CFFFFh Help "This assignment specifies the memory address for the shared RAM. The Adapter will use a range of 32 or 64 kB memory depending on the hardware version. NOTE: If 32kB is selected the adapter jumpers must be set accordingly! Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change the Memory Address assignments if you are in the 'Change configuration' window. NOTE: Memory conflicts above 1 Megabyte will not be detected." NamedItem Prompt "PROM Address" choice "PROM Disabled" pos[2]=00000000b choice "C0000" pos[2]=11100000b mem 0C0000h-0C1FFFh choice "C2000" pos[2]=11100001b mem 0C2000h-0C3FFFh choice "C4000" pos[2]=11100010b mem 0C4000h-0C5FFFh choice "C6000" pos[2]=11100011b mem 0C6000h-0C7FFFh choice "C8000" pos[2]=11100100b mem 0C8000h-0C9FFFh choice "CA000" pos[2]=11100101b mem 0CA000h-0CBFFFh choice "CC000" pos[2]=11100110b mem 0CC000h-0CDFFFh choice "CE000" pos[2]=11100111b mem 0CE000h-0CFFFFh choice "D0000" pos[2]=11101000b mem 0D0000h-0D1FFFh choice "D2000" pos[2]=11101001b mem 0D2000h-0D3FFFh choice "D4000" pos[2]=11101010b mem 0D4000h-0D5FFFh choice "D6000" pos[2]=11101011b mem 0D6000h-0D7FFFh choice "D8000" pos[2]=11101100b mem 0D8000h-0D9FFFh choice "DA000" pos[2]=11101101b mem 0DA000h-0DBFFFh choice "DC000" pos[2]=11101110b mem 0DC000h-0DDFFFh choice "DE000" pos[2]=11101111b mem 0DE000h-0DFFFFh Help "This assignment specifies the memory address for the 'System Accessible PROM' e.g. the RIPL PROM. The PROM will use a range of 8 kB memory. The PROM should be Disabled when not installed or not used. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change the Memory Address assignments if you are in the 'Change Configuration' window." NamedItem Prompt "RAM Access Mode" choice "Synchronous Access" pos[0]=XXXXX1XXb choice "Direct Access" pos[0]=XXXXX0XXb Help "The way the adapter accesses the Shared RAM can be selected. Use the F5=Previous and the F6=Next keys to change the selctions if you are in the 'Change configuration' window."