AdapterID 0F1Fh AdapterName "Tecmar SCSI Tape Adapter" NumBytes 4 fixedResources pos[0]=x0000001b pos[3]=001xxxxxb nameditem Prompt "Adapter BIOS" Choice "BIOS disabled" pos[0]=1xxxxxxxb Choice "DC000h" pos[0]=0xxxxxxxb pos[1]=xx111xxxb mem 0dc000h-0dffffh Choice "D8000h" pos[0]=0xxxxxxxb pos[1]=xx110xxxb mem 0d8000h-0dbfffh Choice "D4000h" pos[0]=0xxxxxxxb pos[1]=xx101xxxb mem 0d4000h-0d7fffh Choice "D0000h" pos[0]=0xxxxxxxb pos[1]=xx100xxxb mem 0d0000h-0d3fffh Choice "CC000h" pos[0]=0xxxxxxxb pos[1]=xx011xxxb mem 0cc000h-0cffffh Choice "C8000h" pos[0]=0xxxxxxxb pos[1]=xx010xxxb mem 0c8000h-0cbfffh Help "This selects the memory location of the tape adapter's BIOS ROM. Conflicting assignments will be marked with an asterick and must be changed to use the tape adapter. To disable the tape adapter's BIOS ROM, choose the 'BIOS DISABLE' option. Note, if two tape adapters reside in the system, one of them must have its BIOS ROM disabled. (Default DC000h)" nameditem Prompt "I/O Port Address" Choice "330h" pos[1]=00xxx011b io 0330h-0333h Choice "334h" pos[1]=01xxx011b io 0334h-0337h Choice "234h" pos[1]=01xxx010b io 0234h-0237h Choice "134h" pos[1]=01xxx001b io 0134h-0137h Choice "230h" pos[1]=00xxx010b io 0230h-0233h Choice "130h" pos[1]=00xxx001b io 0130h-0133h Help "This is the I/O Port of the tape adapter. Conflicting assignments are marked with an asterisk and must be changed to use the tape adapter. (Default 330h)" nameditem Prompt "Arbitration Level" Choice "Level_5" pos[3]=xxxx0101b arb 5 Choice "Level_6" pos[3]=xxxx0110b arb 6 Choice "Level_7" pos[3]=xxxx0111b arb 7 Choice "Level_4" pos[3]=xxxx0100b arb 4 Choice "Level_3" pos[3]=xxxx0011b arb 3 Choice "Level_1" pos[3]=xxxx0001b arb 1 Choice "Level_0" pos[3]=xxxx0000b arb 0 Help "This selectes the DMA channel the tape adapter will use to transfer data. Conflicting assignments will be marked with an asterick and must be changed to use the tape adapter. (Default Level_5)" nameditem Prompt "Interrupt Level" Choice "Int_11" pos[2]=xxxxx011b int 11d Choice "Int_15" pos[2]=xxxxx111b int 15d Choice "Int_14" pos[2]=xxxxx110b int 14d Choice "Int_12" pos[2]=xxxxx100b int 12d Choice "Int_10" pos[2]=xxxxx010b int 10d Choice "Int_9" pos[2]=xxxxx001b int 9d Help "This selects the interrupt channel the tape adapter will use to report status. Conflicting assignments will be marked with an asterick and must be changed to use the tape adapter. (Default Int_11)" nameditem Prompt "SCSI Address" Choice "Addr_7" pos[2]=111xxxxxb Choice "Addr_6" pos[2]=110xxxxxb Choice "Addr_5" pos[2]=101xxxxxb Choice "Addr_4" pos[2]=100xxxxxb Choice "Addr_3" pos[2]=011xxxxxb Choice "Addr_2" pos[2]=010xxxx0b Choice "Addr_1" pos[2]=001xxxx1b Choice "Addr_0" pos[2]=000xxxxxb Help "This is the SCSI address of the tape adapter. (Default 7)" nameditem Prompt "Sync Xfer Started by Tape Adapter Yes/No" Choice "No" pos[2]=xxxx0xxxb Choice "Yes" pos[2]=xxxx1xxxb Help "Synchronous transfer on the SCSI bus will be started by the tape adapter if 'Yes'. (Default No)" nameditem Prompt "SCSI Parity Checking On/Off" Choice "Off" pos[2]=xxx0xxxxb Choice "On" pos[2]=xxx1xxxxb Help "The tape adapter will check SCSI Parity if 'On'. (Default Off)" nameditem Prompt "Fairness On/Off" Choice "On" pos[3]=xxx1xxxxb Choice "Off" pos[3]=xxx0xxxxb Help "Bus Arbitrations Fairness. This controls whether the adapter will release control of the bus when it has been using it exclusively. (Default On)"